standard gradegradegf contentfeatureapplication
n1000a 0% low water absorption
chemical resistance friction and wear application
gear?wheel
g1250a 25% heat resistance
chemical resistance structural parts
bearing retainer
g1300a 30% heat resistance
chemical resistance structural parts
bearing retainer
g1500a 50% high strength structural parts
steel alternating parts
standard grades consist of high-performance polyamide resin with exceptional heat resistance and are designed for injection molding. these grades offer particularly outstanding performance including low water absorbability, high dimensional stability, high heat resistance, and high chemical resistance.
low-friction gradegradegf contentfeatureapplication
n1001a 0% low friction coefficient
high impact strength friction and wear application
gear?wheel
n1002a 0% low friction coefficient
abrasion resistance friction and wear application
gear?wheel
g1352a 35% low friction coefficient
abrasion resistance friction and wear application
gear?wheel
low-friction grades feature excellent wear resistance and low friction coefficient.
toughened gradegradegf contentfeatureapplication
n1006a 0% high impact strength
flexibility tube connector
friction and wear application
g1301a 30% high impact strength
abrasion resistance tube connector
friction and wear application
toughened grades feature high impact resistance and flexibility.
extrusion gradegradegf contentfeatureapplication
n1006c 0% heat resistance
oil resistance
hydrolysis resistance oil tube
coolant tube
n1001d 0% outstanding fuel barrier
heat resistance multi-layered fuel tube
extrusion grades have an excellent moldability and are suitable for tube and pipe parts
standard grade : gn2330, gr2300gn2330, the standard grade, features a balance of mechanical strength, mold-ability, and dimensional stability, while the gr2300 grade delivers additional fluidity and weld strength. both are well suited for a wide range of electrical and electronic components.
high-strength grade : gn2450the gn2450 features high strength and modulus. it is well suited for components like fpc sliders and ic sockets that require modulus and dimensional precision.
high-flow grade : gn2332the gn2332 features improved flow-ability in thin-walled parts. it is well suited for components requiring a high level of flow-ability as typified by 0.3 mm pitch connectors.
low-warp grade : gw2458hfthe gw2458hf offers low warpage and high flow-ability, making it well suited for card connectors. a low mold shrinkage makes it well suited for components that are likely to be warped or twisted.
toughened grade : gt2330the gt2330 features high ductility. it is well suited for components requiring a high strength in pin fitting process.
hb grade : g1300h, g1350h, g1302, gw1458hfthe g1300h and g1350h are suitable for use in a wide range of electrical and electronics components as ul94 hb flammability rating, while the g1302 grade delivers low friction. hb grades do not contain halogen-containing flame-retardants. the gw1458hf offers low warpage and high flow-ability.
led项目是当今时代发展的必然趋势，新时代的绿色环保照明灯具，减少能量释放，对全球气候变暖温室效应起到一定的作用；led灯光柔和，色彩缤纷，节电40%以上，是白炽灯使用寿命的10倍.
日本可乐丽pa9t ta112
日本可乐丽pa9t ta104
日本可乐丽pa9t ta124
日本可乐丽pa9t ta113
余姚市金佑塑胶科技有限公司
沈天瑞
13305841879
余姚市新建北路301号
